BUSH HANGER BAR #NH1297-X-BAR

Hogue rubber grips are molded from a durable synthetic rubber that is not spongy or tacky, but gives that soft recoil absorbing feel, without effecting accuracy. This modern rubber requires a completely different molding process than ordinary neoprene and results in a much superior grip. The material used does not come apart or deteriorate and is resistant to all solvents and oils used around firearms.

A muzzle brake or recoil compensator is a device connected to, or a feature integral to the construction of, the muzzle or barrel of a firarm or cannon that is intended to redirect a portion of propellant gases to counter recoil and unwanted muzzule rise.

Recoil buffers are an easy and inexpensive way to eliminate damage of critical components by preventing the metal to metal contact of the slide or breech block with the frame. Made from a high density polyurethane formulated for maximum shock-absorbing characteristics, the recoil buffer is a drop-in part.The CZ recoil buffer will eliminate the metal to metal impact of the slide on the receiver each time the weapon is fired. You will extend the service life of your pistol as well as have reduced felt recoil by installing one in your weapon. Installation is easy and requires no special tools or modification to your gun.

The Choate Flash Hider and Front Sight for the Ruger Mini-14 fits most 580 and higher series rifles. For use on rifles with a barrel diameter of 0.625″, make sure to measure the barrel before you order, some of the early 580 series rifles have the smaller 0.562″ barrel. The compensator is attached to the gun barrel by a 1/8 inch spring steel roll pin. Gunsmith installation recommended to drill hole for roll pin.

The extended magazine release allows for a quick release of factory

magazines. Simply reach in front of the trigger guard and push forward,

no more having to push up on the factory release. It extends .550″ down

from the trigger guard housing designed not to interfere with benchrest

or sandbags during shooting. The extended magazine release is completely

CNC-machined from billet material – no castings.

Blaser R8 Barrel key (5mm) for the barrel attachment screws the barrel on an R8 Rifle.

The PG-30 Grip Extension will fit (GEN 1-4) Glock models 30, 30SF, 30S. The Pearce Grip PG-30 Grip Extensions replace the magazine base plate and retains all other factory components. They do not alter the capacity of the magazine. The PG-30 will add additional length forming the next logical finger positioning for better control and comfort without sacrificing conceal ability. These units blend with the contours of the handgun giving a factory appearance.

GLOCK OEM factory Recoil Spring Assembly fits G19, G23, G32, G38 (marked 5593 on end of recoil spring guide). For Generation 1, 2, and 3 pistols.

If you want your shots to be on target at long ranges, you need to have your crosshairs leveled perfectly. Some alignment tools on the market level the crosshairs to the scope base or another arbitrary and inconsistent point. The Level-Level-Level scope crosshair alignment tool from Wheeler Engineering is a far better option.It works by aligning your scope with the top of the receiver, which is the most accurate point. The leveling can be done in minutes with this tool. You simply attach the first level to the receiver, place the other level on any flat point on top of the scope, and orient the scope so that the two levels match up! It fits most popular bolt action rifles, and it can be adjusted to fit more obscure designs.